Browsing by Author "Kroff, Macarena"

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Bimetallic NiPt nanoparticles-enhanced catalyst supported on alginate-based biohydrogels for sustainable hydrogen production
    (2023) Ramirez, Oscar; Bonardd, Sebastian; Saldias, Cesar; Kroff, Macarena; O'Shea, James N.; Diaz, David Diaz; Leiva, Angel
    Alginate hydrogel beads were loaded with bimetallic NiPt nanoparticles by in situ reduction of the respective polymer matrix containing precursor metallic ions using a NaBH4 aqueous solution. The alginate hydrogel beads loaded with NiPt nanoparticles were characterized by TEM, AAS, FT-IR, TGA, XPS, and oscillatory rheometry. The prepared hybrid hydrogels were proven to be effective as catalytic materials for the hydrolysis of ammonia borane (AB) for quantitative hydrogen generation using catalytic loadings of 0.1 mol%. In addition, the reaction mechanism of the hydrolytic reaction using NiPt loaded alginate hydrogel beads was determined by Langmuir-Hinshelwood model. The experimental results showed that the reaction mechanism consisted of an initial fast adsorption of reactants at the surface of the nanoparticles, followed by a rate-limiting surface reaction. The NiPt nanoalloys exhibited an enhanced behavior for hydrogen generation with a maximum TOF of 84.1 min-1, almost 71 % higher compared to monometallic platinum atoms, and likely related to a synergistic interaction between both metals. Finally, the hydrogel matrix enabled the material to be easily recovered from the reaction medium and reused in further catalytic cycles without desorption of active nanoparticles from the material.
  • No Thumbnail Available
    Item
    Fabrication of Translucid Gold-nanocellulose Electrodes and Their Potential Application as Hydrogen Peroxide Sensor
    (2021) Kroff, Macarena; Luiza Fornazari, Ana; Correa-Encalada, Daniel; Jose Rubio, Maria; Hevia, Samuel A.; Rio, Rodrigo
    In this work, we describe the fabrication of a transparent gold electrode based on nanocellulose. The electrode was prepared via electron beam evaporation of gold onto nanocellulose films previously spread over a glass slip. Electrodes with different thickness of Au was fabricated, and the material's optical, morphological and electrical properties were assessed. Finally, as a proof of concept, a possible application of this electrode in hydrogen peroxide sensing was performed. The results show that a thin layer of gold on a nanocellulose translucid film allows obtaining a conductive transparent surface that could be used to design a transparent electrode.
  • No Thumbnail Available
    Item
    Lithium Iron Phosphate/Carbon (LFP/C) Composite Using Nanocellulose as a Reducing Agent and Carbon Source
    (2023) Kroff, Macarena; Hevia, Samuel A. A.; O'Shea, James N. N.; de Muro, Izaskun Gil; Palomares, Veronica; Rojo, Teofilo; del Rio, Rodrigo
    Lithium iron phosphate (LiFePO4, LFP) is the most promising cathode material for use in safe electric vehicles (EVs), due to its long cycle stability, low cost, and low toxicity, but it suffers from low conductivity and ion diffusion. In this work, we present a simple method to obtain LFP/carbon (LFP/C) composites with different types of NC: cellulose nanocrystal (CNC) and cellulose nanofiber (CNF). Microwave-assisted hydrothermal synthesis was used to obtain LFP with nanocellulose inside the vessel, and the final LFP/C composite was achieved by heating the mixture under a N-2 atmosphere. The resulting LFP/C indicated that the NC in the reaction medium not only acts as the reducing agent that aqueous iron solutions need (avoiding the use of other chemicals), but also as a stabiliser of the nanoparticles produced in the hydrothermal synthesis, obtaining fewer agglomerated particles compared to synthesis without NC. The sample with the best coating-and, therefore, the best electrochemical response-was the sample with 12.6% carbon derived from CNF in the composite instead of CNC, due to its homogeneous coating. The utilisation of CNF in the reaction medium could be a promising method to obtain LFP/C in a simple, rapid, and low-cost way, avoiding the waste of unnecessary chemicals.